hello forum,
till now I use dotnethelp as target.
but for translation purposes I would like to have my project on paper, so I changed target to Word.
now building the target results in error 10086
(see attached pics also)
please help me with this one.
Target Word results in error 10086
Target Word results in error 10086
You do not have the required permissions to view the files attached to this post.
Thanks,
Henk Jan Schut
The Netherlands
Henk Jan Schut
The Netherlands
-
- Propeller Head
- Posts: 88
- Joined: Wed May 25, 2016 3:35 pm
Re: Target Word results in error 10086
Have you looked into the different settings for the Word Target? Do you have a separate CSS stylesheet for print?henkjans wrote:hello forum,
till now I use dotnethelp as target.
but for translation purposes I would like to have my project on paper, so I changed target to Word.
Technical Writer using and experimenting with Flare version 12.0.5991.
-
- Propellus Maximus
- Posts: 1238
- Joined: Mon Feb 27, 2006 5:56 am
- Location: Melbourne, Australia
Re: Target Word results in error 10086
This looks a bit like a system problem - often can be fixed by making sure you have the right .NET installed.
You might be better off raising a support ticket with Madcap
You might be better off raising a support ticket with Madcap
Margaret Hassall - Melbourne
Re: Target Word results in error 10086
I contacted MC support and its solved now.
MC sollution was:
==
Please go to File> Options> General and select the option to 'Import/Export Word Files Without MS Office.' After selecting that option, please click OK and then try building again.
==
Thx.
MC sollution was:
==
Please go to File> Options> General and select the option to 'Import/Export Word Files Without MS Office.' After selecting that option, please click OK and then try building again.
==
Thx.
Thanks,
Henk Jan Schut
The Netherlands
Henk Jan Schut
The Netherlands