Hi everyone.
We use a lot of callouts in our images to provide information on assemblies of products. Sometimes those callouts require special characters such as degree symbols, registered copyrights etc. I can produce them in Flare and copy them into the capture image, but it changes the font used from helvetica condensed to helvetica medium.
I've solved all the other problems I've had with these docs, this is the last stumbling block. Any help would be greatly appreciated.
Sarah McNeill
Text styles in Capture
-
- Propeller Head
- Posts: 20
- Joined: Mon Jan 18, 2010 10:34 am
- Location: Alpharetta, GA
- Contact:
Re: Text styles in Capture
Have you tried pasting them into Notepad before pasting them into the callout? I'm just guessing you may be copying and pasting a style with the special character.
Roger Bell
Technical Information Developer
Bottomline Technologies, Inc.
Alpharetta, GA 30005 USA
+1.770.576.3537 (office)
Technical Information Developer
Bottomline Technologies, Inc.
Alpharetta, GA 30005 USA
+1.770.576.3537 (office)
-
- Senior Propellus Maximus
- Posts: 2089
- Joined: Tue Mar 07, 2006 5:06 pm
- Location: Adelaide, far side of the world ( 34°56'0.78\"S 138°46'44.28\"E).
- Contact:
Re: Text styles in Capture
Sounds like an enhancement request is needed here - the ability to insert a symbol from within capture.
You can add an enhancement request here.
You can add an enhancement request here.
Steve
Life's too short for bad coffee, bad chocolate, and bad red wine.