Report Run Time

Post Reply
Marc Baker
Jr. Propeller Head
Posts: 2
Joined: Mon Aug 12, 2019 12:45 pm
Location: Minneapolis, MN

Report Run Time

Post by Marc Baker »

Any ideas on what could cause a report to run for several hours?
The project is about 100 MB, around 1000 topics. As far as I can tell it was working all last week, and taking a few minutes to run at most. Today it seems to be hung up on "Scan in Progress". Cancelling/restarting the scan don't seem to have had any noticeable effect. Any suggestions are welcomed. :)
SteveS
Senior Propellus Maximus
Posts: 2087
Joined: Tue Mar 07, 2006 5:06 pm
Location: Adelaide, far side of the world ( 34°56'0.78\"S 138°46'44.28\"E).
Contact:

Re: Report Run Time

Post by SteveS »

Have you tried deleting the Analyzer folder?
Image
Steve
Life's too short for bad coffee, bad chocolate, and bad red wine.
Marc Baker
Jr. Propeller Head
Posts: 2
Joined: Mon Aug 12, 2019 12:45 pm
Location: Minneapolis, MN

Re: Report Run Time

Post by Marc Baker »

Shortly after I posted the question, I tried adding a test topic to the project and doing a commit.

The report finished a couple minutes after that.

Correlation is not causation, but reports seem to be functioning now. :roll:

I'll keep an eye on that analyzer folder, I know deleting it has cleared up issues in the past. Thanks.
Post Reply