Has anyone found that the CHM's Search function no longer works after building? This is happening on our system here, as well as with our partners in the US. Source Control is handled by GIT, and both systems are on different networks. We are running Flare 2020 r2, while the US are on r1,
It appears to have stopped working sometime in July this year, which is around the time the following two upgrades were applied to Windows 10 Pro version 2004 which we both use,
Cumulative for Windows 10 version 2004 - 64bit systems (KB4565503)
https://support.microsoft.com/en-us/hel ... -kb4565503
Cumulative for .NET Framewk 2.5 and 4.8 for Windows 10 version 2004 for x64 (KB4565627)
https://support.microsoft.com/en-us/hel ... -framework
We'd be most interested to know if anyone with the same or similar configuration has experienced this.
Search - "No topics found" message
-
- Sr. Propeller Head
- Posts: 193
- Joined: Fri Dec 09, 2005 9:23 pm
- Location: NORTHAMPTON, England, UK
- Contact:
Search - "No topics found" message
George Bell
Techno-Vision Systems Ltd., U.K.
Techno-Vision Systems Ltd., U.K.
Re: Search - "No topics found" message
See "Troubleshooting the No Topics Found Issue" in the help:
https://help.madcapsoftware.com/flare20 ... FoundIssue
https://help.madcapsoftware.com/flare20 ... FoundIssue
-
- Sr. Propeller Head
- Posts: 193
- Joined: Fri Dec 09, 2005 9:23 pm
- Location: NORTHAMPTON, England, UK
- Contact:
Re: Search - "No topics found" message
Hi Joe, We cannot thank you enough for the link you provided.
I more than suspect that the problem with the itcc.dll becoming unregistered was likely caused by one of those two July 2020 updates to Windows 10 version 2004. I do not believe it a co-incidence that two separate systems, one on each side of the Pond, suffered the same problem.
It's rather sad to say that Madcap's own Help: Search did not bring this up, and moreover, that the Topic really needs to be updated to include Windows 10 as opposed to just 7 & 8. Even sadder is that Technical Support themselves were unable to come up with the solution after a total of five hours on the phone and Team Viewer. I would love to be a fly on the wall when the case is reviewed
So many thanks again, and if anyone else gets this problem, please do report it to Madcap.
I more than suspect that the problem with the itcc.dll becoming unregistered was likely caused by one of those two July 2020 updates to Windows 10 version 2004. I do not believe it a co-incidence that two separate systems, one on each side of the Pond, suffered the same problem.
It's rather sad to say that Madcap's own Help: Search did not bring this up, and moreover, that the Topic really needs to be updated to include Windows 10 as opposed to just 7 & 8. Even sadder is that Technical Support themselves were unable to come up with the solution after a total of five hours on the phone and Team Viewer. I would love to be a fly on the wall when the case is reviewed
So many thanks again, and if anyone else gets this problem, please do report it to Madcap.
George Bell
Techno-Vision Systems Ltd., U.K.
Techno-Vision Systems Ltd., U.K.
Re: Search - "No topics found" message
No problem Barbara.
I think it usually happens after an installation. It's worth doing a test build after each Flare installation/update on each PC, as the problem isn't reported as a build error, and so is easy to miss.
Yeah, although I knew it was in the help, finding it wasn't that easy. I think MadCap's help uses the elasticsearch engine, and I don't know if it supports searching for phrases - or at least using quotes like "no topics found" doesn't work.
I think it usually happens after an installation. It's worth doing a test build after each Flare installation/update on each PC, as the problem isn't reported as a build error, and so is easy to miss.
Yeah, although I knew it was in the help, finding it wasn't that easy. I think MadCap's help uses the elasticsearch engine, and I don't know if it supports searching for phrases - or at least using quotes like "no topics found" doesn't work.
-
- Jr. Propeller Head
- Posts: 1
- Joined: Mon Aug 23, 2021 10:59 am
Re: Search - "No topics found" message
I had this problem after installing Flare on a new PC. I had to work over the RegisterItcc.bat file to get it to work, but once it worked, all was good.
In addition to Search not working with the "no topics found" message, I could not get the Preview of topics to scroll - with the mouse nor the keyboard - but that also was fixed after the Bat file ran successfully.
In addition to Search not working with the "no topics found" message, I could not get the Preview of topics to scroll - with the mouse nor the keyboard - but that also was fixed after the Bat file ran successfully.
Re: Search - "No topics found" message
I had the same issue after installing the latest MadCap Flare version. I have not switched PCs or reinstalled anything else. Perhaps this was caused by a Windows update.
The troubleshooting topic linked to above helped me solve the problem. But it needs to be updated.
The troubleshooting topic linked to above helped me solve the problem. But it needs to be updated.
-
- Jr. Propeller Head
- Posts: 4
- Joined: Tue Mar 25, 2008 2:16 pm
Re: Search - "No topics found" message
We have implemented the workaround suggested in this thread (thank you!) and now search works locally in the chm. But when we hand off the chm to development, they can't get search to work. Any ideas what could be causing that?