Using profiles
-
sbaldridge
- Jr. Propeller Head
- Posts: 2
- Joined: Wed Aug 20, 2008 10:36 am
Using profiles
We need to pull screen shots in our test lab from a system with several versions. Can profiles be applied to images that weren't created with Capture?
-
SteveS
- Senior Propellus Maximus
- Posts: 2089
- Joined: Tue Mar 07, 2006 5:06 pm
- Location: Adelaide, far side of the world ( 34°56'0.78\"S 138°46'44.28\"E).
- Contact:
Re: Using profiles
Hi,
Welcome to the forums!
Profiles are the default settings you wish to apply to captures, so you can't apply them to an existing image as a profile.
You can open an image in capture and apply the same settings you have in your profile to the image via the file properties dialog (double click the image to launch)
HTH
Welcome to the forums!
Profiles are the default settings you wish to apply to captures, so you can't apply them to an existing image as a profile.
You can open an image in capture and apply the same settings you have in your profile to the image via the file properties dialog (double click the image to launch)
HTH
Steve
Life's too short for bad coffee, bad chocolate, and bad red wine.
-
sbaldridge
- Jr. Propeller Head
- Posts: 2
- Joined: Wed Aug 20, 2008 10:36 am
Re: Using profiles
As I suspected 
... we have at least 100 images to apply settings to...time for a feature request I guess.
Thanks.
... we have at least 100 images to apply settings to...time for a feature request I guess.Thanks.
Re: Using profiles
i am gonna post a feature request on this as well..otherwise its back to snagit or photoshop for this...sbaldridge wrote:As I suspected
Thanks.
If you submit your bug feedback request here, the more likely it'll get fixed or included in a future release
Open Utilities PageLayout Resizer for Flare/Blaze | Batch builder
Open Utilities PageLayout Resizer for Flare/Blaze | Batch builder