Hello:
I've installed Flare 5.0 and want to use DotNet Help for the online Help. Question: if I select the HelpViewerEmbeddedClient API to make DotNet Help calls from my application, do I need to rebuild the application every time I change the contents of the online Help? With embedded Help, this seems likely.
Thanks--David
Using the HelpViewerEmbeddedClient API
-
- Senior Propellus Maximus
- Posts: 2089
- Joined: Tue Mar 07, 2006 5:06 pm
- Location: Adelaide, far side of the world ( 34°56'0.78\"S 138°46'44.28\"E).
- Contact:
Re: Using the HelpViewerEmbeddedClient API
Hi David,
Welcome to the forums.
I suspect you will have to recompile. To make sure, why not conduct a quick test - compile, make a change to the help and see what differences have 'flowed through', then recompile and check.
Then, let us all know your findings
HTH
Welcome to the forums.
I suspect you will have to recompile. To make sure, why not conduct a quick test - compile, make a change to the help and see what differences have 'flowed through', then recompile and check.
Then, let us all know your findings
HTH
Steve
Life's too short for bad coffee, bad chocolate, and bad red wine.