Three of us are working on the same Flare project. I am the only one who can build a chm - the other two generate a bloated chm that cannot be opened (broken = 34MB, good =24 MB).
The project is shared via source control (Perforce) so should be identical on all machines.
Can anyone shed light on this?
EDIT
Since managed to get one other user fixed by solving another seemingly unrelated file structure issue.
chm build problems with shared project
-
Andrew Heard
- Sr. Propeller Head
- Posts: 139
- Joined: Tue Aug 19, 2008 12:17 am
- Location: Perth, Western Australia
chm build problems with shared project
Some mornings it just doesn't seem worth it to gnaw through the leather straps.
-
Andrew Heard
- Sr. Propeller Head
- Posts: 139
- Joined: Tue Aug 19, 2008 12:17 am
- Location: Perth, Western Australia
Re: chm build problems with shared project
Had a recurrence of this problem.
No error messages.
No log file.
Claims to have compiled the chm, but can't open it.
Bad chm ~ 40GB; good chm ~ 21GB
Deleted old target file and made new one - compiled OK.
Odd.
No error messages.
No log file.
Claims to have compiled the chm, but can't open it.
Bad chm ~ 40GB; good chm ~ 21GB
Deleted old target file and made new one - compiled OK.
Odd.
Some mornings it just doesn't seem worth it to gnaw through the leather straps.
-
Madcap Guru
- Sr. Propeller Head
- Posts: 238
- Joined: Tue Mar 17, 2009 10:41 pm
Re: chm build problems with shared project
Are you buiilding to share drive? or to a local drive, I would be sure that they can all try building it to a local drive to see if its a network issue.
Rick Ferrell
____________________________
Former Flare and Robohelp Support
____________________________
Former Flare and Robohelp Support